Fema S40-C1, Руководство пользователя, Страница: 2 / 28

FEMA ELECTRÓNICA . Series S . S40-C1
2
1. Panel meter S40-C1
Counter, ratemeter and periodmeter in compact 72 x 36 mm size
Panel meter in compact 72 x 36 mm size, with 14 mm standard digit
height. Configurable with 5 impulse counter modes
(see section 1.2)
,
2 ratemeter modes
(see section 1.3)
and a 1 periodmeter mode
(see
section 1.4)
.
Highly configurable, accepts all types of sensors (NPN, PNP, push-
pull, Namur, inductive, pick-up, mechanical, TTL, CMOS, ...) including
quadrature signals (single and bidirectional encoder signals).
Reading from 9999 to -1999 with decimal point, scalable reading
with configurable multiplier factor (1 to 9999) and configurable di -
vider factor (1 to 9999). Includes internal pull-up and pull-down re -
sistors, configurable trigger levels, detection by rising or falling edge,
excitation voltage configurable from 5 Vdc to 18 Vdc.
Options for output and control with 1 and 2 relays, transistor out
-
puts, controls for SSR relays, isolated analog outputs, communica -
tions in Modbus RTU, RS-485 ASCII and RS-232. Special options with
4 relay outputs.
Independent alarms configurable as maximum or minimum, with 1
or 2 setpoints per alarm, hysteresis, independent activation and de -
activation delays and control for inverted relay.
Front protection IP54. Connections by plug-in screw terminals. For
industrial applications.
• ‘
Fast access
’ menu to selected functions, accessible with key UP (
5
)
(see section 1.19.12)
• Function ‘ On power up ’ for system protection on first ‘cold’ start-
up or automatic reset
(see section 1.19.15)
• Special ‘ FAST ’ mode for fast counting applications
(see section 1.16)
• Special ‘ SLOW ’ mode for slow ratemeter applications (low frequen -
cy applications) (see section 1.15)
• Direct configuration for most usual sensor, at the ‘
SnSr / Auto
’
menu
(see section 1.19.10)
• Function ‘ Trigger Sense ’ helps to detect the correct trigger level
(see section 1.13)
Multiple display filters, memory for maximum and minimum reading,
password protection, 5 brightness levels.
Index
1. Panel meter S40-C1 . . . . . . . . . . . . . . . . . . . . . . 2
1.1 How to order . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Impulse counter modes . . . . . . . . . . . . . . . . . . 3
1.3 Ratemeter modes . . . . . . . . . . . . . . . . . . . . . . 3
1.4 Periodmeter mode . . . . . . . . . . . . . . . . . . . . . 3
1.5 Functions included . . . . . . . . . . . . . . . . . . . . . 3
1.6 Front view . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.7 Power connections . . . . . . . . . . . . . . . . . . . . . 4
1.8 Sensor configuration and connections . . . . . . . . . . 4
1.9 Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.10 Signal connections . . . . . . . . . . . . . . . . . . . . 4
1.11 Technical specifications . . . . . . . . . . . . . . . . . . 5
1.12 Mechanical dimensions (mm) . . . . . . . . . . . . . . 5
1.13 Function ‘Trigger Sense’ . . . . . . . . . . . . . . . . . 6
1.14 Function ‘cycle counter’ . . . . . . . . . . . . . . . . . 6
1.15 ‘SLOW’ mode . . . . . . . . . . . . . . . . . . . . . . . 6
1.16 ‘FAST’ mode . . . . . . . . . . . . . . . . . . . . . . . . 6
1.17 How to operate the menus . . . . . . . . . . . . . . . . 7
1.18 Messages and errors . . . . . . . . . . . . . . . . . . . 7
1.19 Configuration menu . . . . . . . . . . . . . . . . . . . . 8
1.19.1 Initial set-up . . . . . . . . . . . . . . . . . . . . . . 8
1.19.2 Configuration for ‘cn.1’ . . . . . . . . . . . . . . . . 8
1.19.3 Configuration for ‘cnq.2’ . . . . . . . . . . . . . . . 9
1.19.4 Configuration for ‘cnI.3’ . . . . . . . . . . . . . . . . 9
1.19.5 Configuration for ‘cnc.4’ . . . . . . . . . . . . . . . 9
1.19.6 Configuration for ‘cnd.5’ . . . . . . . . . . . . . . .10
1.19.7 Configuration for ‘rt.6’ . . . . . . . . . . . . . . . .10
1.19.8 Configuration for ‘rtq.7’ . . . . . . . . . . . . . . . .10
1.19.9 Configuration for ‘Prd.8’ . . . . . . . . . . . . . . .11
1.19.10 Sensor configuration . . . . . . . . . . . . . . . . .11
1.19.11 Alarms . . . . . . . . . . . . . . . . . . . . . . . .13
1.19.12 Fast access . . . . . . . . . . . . . . . . . . . . . .14
1.19.13 Super fast access . . . . . . . . . . . . . . . . . . .14
1.19.15 Menu ‘On Power Up’ . . . . . . . . . . . . . . . .14
1.19.14 Menu ‘Key LE’ . . . . . . . . . . . . . . . . . . . .14
1.19.16 Menus ‘Overrange / underrange’ . . . . . . . . . . 15
1.19.17 Left zeros . . . . . . . . . . . . . . . . . . . . . . . 15
1.19.18 Vexc. control . . . . . . . . . . . . . . . . . . . . . 15
1.19.19 Function ‘Password’ . . . . . . . . . . . . . . . . . 15
1.19.20 Factory reset . . . . . . . . . . . . . . . . . . . . . 15
1.19.21 Firmware version . . . . . . . . . . . . . . . . . . . 15
1.19.22 Brightness . . . . . . . . . . . . . . . . . . . . . . 15
1.19.23 Access to optional modules . . . . . . . . . . . . . 15
1.20 Full configuration menu . . . . . . . . . . . . . . . . . 16
1.21 Factory configuration . . . . . . . . . . . . . . . . . . .19
1.22 To access the instrument . . . . . . . . . . . . . . . . .20
1.23 Modular system . . . . . . . . . . . . . . . . . . . . . .20
1.24 Precautions on installation . . . . . . . . . . . . . . . .21
1.25 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . .21
1.26 CE declaration of conformity . . . . . . . . . . . . . . .21
2. Output and control modules . . . . . . . . . . . . . . . . .22
2.1 Module R1 . . . . . . . . . . . . . . . . . . . . . . . . . .22
2.2 Module T1 . . . . . . . . . . . . . . . . . . . . . . . . . .22
2.3 Module SSR . . . . . . . . . . . . . . . . . . . . . . . . .23
2.4 Module AO . . . . . . . . . . . . . . . . . . . . . . . . .23
2.5 Module RTU . . . . . . . . . . . . . . . . . . . . . . . . .24
2.6 Module S4 . . . . . . . . . . . . . . . . . . . . . . . . . .24
2.7 Module S2 . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2.8 Modules R2, R4 . . . . . . . . . . . . . . . . . . . . . . . 25