User’s Manual M40-P
Operating the Configuration Menu
To enter the
“Configuration Menu”
press the SQ button. The
“Configuration Menu”
allows to change the configuration of
the instrument. Access to the
“Configuration Menu”
can be
password protected with the function “PASSWord”. During
operation with the
“Configuration Menu”
the alarms remain
“frozen” and are kept on-hold. When leaving the
“Configura
-
tion Menu”
the instrument performs a restart, and new con-
figuration is applied. During the restart of the instrument a
short alarm deactivation is performed.
Configuration Menu Tree -
See page 6.
Rollback -
After 30 seconds without interaction from the
operator, the instrument leaves the
“Configuration Menu”
,
discarding all changes.
Button SQ -
Moves horizontally on the menu. Allows selec-
tion of the current option displayed. During a value selection
menu (for example a setpoint value) validates the value on
display.
Button UP -
Moves vertically on the menu. Displays the
available menu options. During a value selection menu (for
example a setpoint value) increases digit value from 0 to 1,
2, 3, 4, 5, 6, 7, 8, 9.
Button LE -
Leaves the current menu. Pressing LE several
times will leave all menus and leave the
“Configuration Menu”
tree. During a value selection menu (for example a setpoint
value) allows to select each digit for modification with the
UP button.
Reset -
Leaving the
“Configuration Menu”
forces a restart of
the instrument, even in case of no changes in configuration.
Configuration
See menu for Alarm1
See menu for Alarm1
See menu for Alarm1
Alarm1
Maximum
Minimum
Memory of minimum
Option1
Option installed
Option2
Option installed
Information Menu
To enter the
“Information Menu”
press the SQ button. The
“Information Menu”
allows to visualize information and does
not allow to modify the configuration of the instrument. It is
not affected by the “PASSWord” function. During operation
with the
“Information Menu”,
alarms remain “frozen” and are
kept on-hold. Leaving the
“Information Menu”
returns to the
measuring state of the instrument, without restart.
Information Menu Tree -
See page 5.
Rollback -
After 30 seconds without interaction from the
operator, the instrument leaves the
“Information Menu”
.
Button SQ -
Selects the visible option.
Button UP -
Moves vertically along the available menu op-
tions.
Button LE -
Leaves selected menu or leaves the
“Informa-
tion Menu”
.
Operating the Information Menu
mA or Vdc
Input Low
Display Low
Input High
Display High
Memory of maximum
“On / Off”
“Max” / “Min”
Setpoint
Hysteresis
Delay
Setpoint2
Counts
Seconds
Second
setpoint
Measure
“Volt”/”mA”
Measured Value
Option3*
Option installed*
(*Option3 available soon)
Datasheet
Sales:
+44 (0) 1273 570 220
Website:
www.amplicon.com
Email:
IT and Instrumentation for industry
Amplicon.com
