background image

FEMA ELECTRÓNICA . Series S . S40-P

15

This instrument has been designed and verified conforming to the 61010-1 CE Security 

Regulation, for industrial applications.

Installation of this instrument must be performed by qualified personnel only. This manual 

contains the appropriate information for the installation. Using the instrument in ways not 

specified by the manufacturer may lead to a reduction of the specified protection level. 

Disconnect the instrument from power before starting any maintenance and / or instal

-

lation action.

The instrument does not have a general switch and will start operation as soon as power is 

connected. The instrument does not have protection fuse, the fuse must be added during 

installation.

The instrument is designed to be panel mounted. An appropriate ventilation of the in

-

strument must be assured. Do not expose the instrument to excess of humidity. Maintain 

1.14 Precautions on installation

Risk of electrical shock. Instrument terminals can be connected 

to dangerous voltage.

Instrument protected with double isolation. No earth connection 

required.

Instrument conforms to CE rules and regulations. 

1.16 Warranty

This instrument is warranted against all manufacturing defects for a 

period of 24 MONTHS from the shipment date. This warranty does 

not apply in case of misuse, accident or manipulation by non-autho

-

rized personnel. In case of malfunction get in contact with your local 

provider to arrange for repair. Within the warranty period and after 

examination by the manufacturer, the unit will be repaired or substi

-

tuted when found to be defective. The scope of this warranty is lim

-

ited to the repair cost of the instrument, not being the manufacturer 

eligible for responsibility on additional damages or costs.

1.15 Factory configuration

Range 

4/20 mA

Scaling and decimal point 

4/20 mA = 0/100.0

Alarms 1 and 2

   Active 

off (disabled)

   Type 

alarm as maximum

   Setpoint 

1000

   Hysteresis 

0 counts

   Activation delay 

0.0 seconds

   Deactivation delay 

0.0 seconds

   Setpoint 2 

off

   Inverted relay 

off

   Locked alarms 

off

Display

   Fixed digits 

off

   Average 

off

   Steps 

off

   Left zeros 

off

   Maximum memory 

-1999

   Minimum memory 

9999

   Peak&Hold 

off

Tools

   Segment linearization 

off

   ‘Fast access’ 

off

   ‘On power-up’ 

      Delay 

0 seconds

      Tare 

off

   Key LE 

no function

   Excitation voltage 

+20 Vdc

   Password 

off

   Brightness 

3

clean by using a humid rag and do NOT use abrasive products such as alcohols, solvents, 

etc.

General recommendations for electrical installations apply, and for proper functionality 

we recommend : if possible, install the instrument far from electrical noise or magnetic 

field generators such as power relays, electrical motors, speed variators, ... If possible, do 

not install along the same conduits power cables (power, motor controllers, electrovalves, 

...) together with signal and/or control cables.

Before proceeding to the power connection, verify that the voltage level available matches 

the power levels indicated in the label on the instrument.

In case of fire, disconnect the instrument from the power line, fire alarm according to local 

rules, disconnect the air conditioning, attack fire with carbonic snow, never with water.

1.17 CE declaration of conformity

Manufacturer  FEMA ELECTRÓNICA, S.A.

 

 

Altimira 14 - Pol. Ind. Santiga

 

 

E08210 - Barberà del Vallès 

 

 

BARCELONA  - SPAIN

 

 

www.fema.es - [email protected]

Products  

S40-P

The manufacturer declares that the instruments indicated comply with the 

directives and rules indicated below.
Electromagnetic compatibility directive 2014/30/EU

 

Low voltage directive 2014/35/EU

 

Directive ROHS 2011/65/EU

Security rules EN-61010-1

Instrument  

Fixed

 

 

Permanently connected

 

Pollution degree 1 and 2 (without condensation) 

 

Isolation  

Double

Electromagnetic compatibility rules EN-61326-1

EM environment  Industrial

Immunity levels

EN-61000-4-2  By contact ±4 KV 

Criteria B

 

 

By air ±8 KV 

Criteria B

EN-61000-4-3    

Criteria A

EN-61000-4-4   On AC power lines : ±2 KV 

Criteria B

 

 

On DC power lines : ±2 KV 

Criteria B

 

 

On signal lines : ±1 KV 

Criteria B

EN-61000-4-5  Between AC power lines ±1 KV 

Criteria B

 

 

Between AC power lines and earth ±2 KV 

Criteria B

 

 

Between DC power lines ±1 KV 

Criteria B

 

 

Between DC power lines and earth ±2 KV 

Criteria B

 

 

Between signal lines and earth ±1 KV 

Criteria B 

EN-61000-4-6   

Criteria A

EN-61000-4-8  30 A/m at 50/60 Hz 

Criteria A

EN-61000-4-11  0 % 1 cycle 

Criteria A

 

 

40 % 10 cycles 

Criteria A

 

 

70 % 25 cycles 

Criteria B

 

 

0 % 250 cycles 

Criteria B

Emission levels

CISPR 11  

Instrument Class A, Group 1  

Criteria A

Barberà del Vallès October 2017

 

Xavier Juncà - Product Manager

According  to  directive  2012/19/EU,  electronic  equip-

ment  must  be  recycled  in  a  selective  and  controlled 

way at the end of its useful life.

Содержание S40-P





















Отзывы: