Felt Bicycle Скачать руководство пользователя страница 3

1

CPSC NOTICE

All Felt Bicycles meet CPSC regulations. Certificates of 

conformity are posted at www.feltbicycles.com/cpsc

All Felt Bicycles intended for children meet CPSIA standards.

WARRANTY NOTICE

Felt’s warranty policy is located in the back of this owner’s 

manual. It can also be found at www.FeltBicycles.com 

 

Periodically review the Tech Support section at

www.FeltBicycles.com for updates and additional technical 

information regarding this product.

GENERAL WARNING:

  Like any sport, bicycling involves risk of injury and damage. By choosing to 
ride a bicycle, you assume the responsibility for that risk, so you need to know — 
and to practice — the rules of safe and responsible riding and of proper use and 
maintenance. Proper use and maintenance of your bicycle  reduces risk of injury. 

  This Manual contains many “Warnings” and “Cautions” concerning the 
consequences of failure to maintain or inspect your bicycle and of failure to follow 
safe cycling practices. 

  • The combination of the      safety alert symbol and the word 

WARNING

 

indicates a potentially hazardous situation which, if not avoided, could result in 
serious injury or death.

  • The combination of the      safety alert symbol and the word 

CAUTION

 

indicates a potentially hazardous situation which, if not avoided, may result in 
minor or moderate injury, or is an alert against unsafe practices.

  • The word 

CAUTION

 used without the safety alert symbol indicates a situation 

which, if not avoided, could result in serious damage to the bicycle or the voiding 
of your warranty. 

  Many of the Warnings and Cautions say “you may lose control and fall”. 
Because any fall can result in serious injury or even death, we do not always 
repeat the warning of possible injury or death. 

  Because it is impossible to anticipate every situation or condition which can 
occur while riding, this Manual makes no representation about the safe use 
of the bicycle under all conditions. There are risks associated with the use 
of any bicycle which cannot be predicted or avoided, and which are the sole 
responsibility of the rider.

    Many Felt Bicycles have unique and proprietary component designs. These 
models come with special instructions for set-up, adjustment and care. This 
information is also available on our web site, www.feltbicycles.com

Please refer to the Appendices for special information on Felt Bicycles. 

Содержание Bicycle































Отзывы: