Felo FW-06, Руководство по обслуживанию

Страница: 24 / 134

Spot Inspection and Adjustment
20 Service Manual
■
Spot inspection of the speed-control
handlebar
When the power switch is in the (OFF) position, check
whether the speed-control handlebar can be turned
from the fully-closed to the fully-opened position
smoothly.
If the operation is impeded, please replace the faulty
parts.
■
Brake fluid level adjustment
1. Front and rear brake fluid level adjustment
Place the motorcycle vertically on a flat surface for
the brake fluid level to be parallel to the brake pump
level so as to precisely read the brake fluid level.
2. Perform the following spot inspection:
When the brake fluid level is below the lower
limit mark, promptly refill the brake fluid to the
specified level .
Recommended brake fluid: DOT 3 brake fluid
Caution
● Brake fluid can damage plastic and
painted surfaces. If any fluid spills
over, please wipe it immediately, and
clean the affected area completely.
■
Spot inspection of the brake hose
1. Check if the brake hose is cracked or damaged. If
any of the said conditions is found, please replace
it promptly.
2. Perform the following spot inspection:
• Check if the brake hose bracket is loose →
Tighten the brake hose bracket
3. Tightly hold and release the brake handle several times.
4. Check if the brake handle works smoothly →
Discharge the air from the brake system and
replace the faulty parts.
5. Perform the following spot inspection:
• Brake hose
If the brake fluid leaks, replace the brake hose
in time.
Low limit liquid level mark
Front brake fluid
reservoir
Rear brake
fluid reservoir
Spot Inspection and Adjustment