Felo FW-06, Руководство по обслуживанию

Страница: 6 / 134

Basic Instructions
2 Service Manual
■
Important safety precautions:
When inspecting and repairing the high-voltage system, please follow the instructions below.
● When carrying out repair or maintenance of the motorcycle, please always wear safety protection gears, and
use insulation tools. Please always check safety protection gears and insulation tools before using.
● When carrying out any high-voltage work, please indicate on the motorcycle that such work is being carried out
to ensure the safety of other people.
Make sure that you clearly understand all safety rules of the repair/maintenance workshop, wear proper clothes and
use safety devices. The following need extra attention when carrying out any maintenance work:
● Before starting any work, please read all instructions in the manual, and ensure that you have all necessary
tools to replace or repair components so as to safely and fully complete your work.
● When you carry out hammering, drilling, grinding or prying operations, or work in the vicinity of high-voltage air
or fluids, springs, or other energy storage components, you need to wear qualified safety glasses, goggles, or
face mask during the entire operating process to protect your eyes.
● Hot or sharp components, may cause serious burns or cuts. Therefore, when necessary, you need to use other
protection gears such as gloves or safety boots.
● If you need to raise your motorcycle for maintenance, please use a jack or special base. Any time you raise
your vehicle, make sure it is always securely supported.
Special tools:
To replace non-universal parts, you should carefully and properly use the tools recommended by our company.
Special parts:
When replacing parts, please use the brands specified by our company. If you use a brand other than our specified
brands, it may harm the part's performance, thus severely shortening the service life of your motorcycle.