4
AM-PRO UI & INDICATOR LAYOUT
PROJECT:
DATE:
REV:
AUTHOR:
COPERFIELD
03-AUG-16
X4
M. GARTZ
OPERATION
The air purifier continuously works in automatic mode; the user can select which preference they would like the purifier to use based on the location or desired
operation of the air purifier. The purifier will operate through a minimized range of speeds, not exceeding the maximum level selected, in order to run quietly while
cleaning the room of contaminants. Once air is cleaned, and no sensors are activated, the unit lowers to energy saving mode to reduce energy consumption and
extend the life of the filters.
When Auto Mode is selected, the Auto mode indicator will be blue. This mode uses the EnviroSmart™ technology to monitor the air quality, motion and noise level
to adjust the fan speed in order purify your air as quickly as possible. Once air is cleaned, and no sensors are activated, the unit lowers to energy saving mode to
reduce energy consumption and extend the life of the filters.
When Quiet Mode is selected, the Auto Mode indicator will be green. The machine will continue to use EnviroSmart™ but only utilizes the 3 lowest, most quiet of
the 5 fan speeds.
When Manual Mode is selected, the Manual mode indicator will be blue. This mode allows you to choose one of the 5 fan speeds and keep unit at this speed until
Auto Mode is chosen/selected. EnviroSmart™ sensors will NOT adjust the fan speed in this mode.
DISPLAY PANEL
HEPA FILTER REPLACEMENT INDICATOR
–
This indicator will show
its status when the access panel is open or closed. If the light is red this indicates
the filter needs replacing. The replacement period will vary depending on the
filters used, hours of use, air quality, and rate of air flow. For filter replacement
indicator descriptions see
FILTER REPLACEMENT INDICATORS
section.
CARBON FILTER REPLACEMENT INDICATOR
–
This indicator will
show its status when the access panel is open or closed. If the light is red this
indicates the filter needs replacing. The replacement period will vary depending
on the filters used, hours of use, air quality, and rate of air flow. For filter
replacement indicator descriptions see
FILTER REPLACEMENT INDICATORS
section.
ACCESSORY INDICATOR
–
This indicator will show its status when the
access panel is open or closed. This indicator will only be used if an accessory filter
is installed in the unit. If the light is red this indicates the filter needs replacing.
The replacement period will vary depending on the filters used, hours of use, air
quality, and rate of air flow. For filter replacement indicator descriptions see
FILTER
REPLACEMENT INDICATORS
section.
AIR QUALITY SENSOR
–
This indicator will show its status when the
access panel is open or closed. This indicator monitors the air quality and adjusts
the fan speed to keep your air purified. Blue, amber, and red lights indicate the
purity of your air.
PlasmaTRUE™ TECHNOLOGY
–
This indicator will show its status when
the access panel is open or closed. Creates an ionized field to help safely remove
airborne pollutants. To turn on and off the PlasmaTRUE™ TECHNOLOGY, touch
and hold the PLASMA indicator. A blue light illuminates when the PlasmaTRUE™
TECHNOLOGY is enabled. To disable the PlasmaTRUE™ TECHNOLOGY, press and hold
“Plasma” indicator until light is off.
AUTO MODE
–
To select, press and hold the button until the icon illuminates. This
mode uses the EnviroSmart™ technology to monitor the air quality, motion and noise level
to adjust the fan speed in order to purify your air as quickly as possible. This button also
includes QUIET MODE. To select, press and hold until the button turns green. The machine
will continue to use EnviroSmart™ but only utilizes the 3 lowest, most quiet of the 5 fan
speeds.
MANUAL MODE
–
To select, press the button until the icon illuminates. This
mode allows you to choose one of the 5 fan speeds and keep the unit at this speed
until AUTO MODE is chosen again. The internal sensors will not adjust the fan speed
in this mode.
FAN SPEED INDICATORS
–
The fan has 5 speeds and can reach turbo
speed to clean the room in case of high levels of contaminants. The number of bars
illuminated indicates fan speed.
1
5
2
6
3
7
8
4
1
2
3
4
5
6
7
8
NOTE: after the unit is turned on the “AQ” light will flash for a few minutes while the system self-calibrates.
1 – whisper
2 – low
3 – medium
4 – high
5 – turbo
