background image

15

14

there is ground coffee build-up on the nut that interferes with its 

removal, use a small brush to clear the coffee before attempting  

to remove it. 

 

Carefully remove the inner burr by lifting it off the screw boss  

and threaded bolt protruding from the rotor gear.

5.  There are two steel drive pins between the inner burr and rotor 

gear. These pins can also be removed for extra cleaning. Be sure 

not to lose them, as they transfer rotational motion from the rotor 

to the inner burr and are essential for proper functionality.

To replace the burrs, repeat these steps in reverse order.  

Make sure that the drive pins are in place before reattaching the 

inner burr. Also ensure that the outer burr carrier and load bin are 

fully locked into place before resuming operation.

WARRANTY

For service, repair, or any questions regarding your Opus Conical 

Burr Grinder, please visit Fellowproducts.com/pages/gear-guides.  

Do NOT mail the product back to the manufacturer or bring it to a 

service center without first talking to a Fellow customer service 

representative.

2-Year Limited Warranty 

Register For An Additional Year*

Fellow warrants this product against any defects that are due to faulty 

material or workmanship for a two-year period after the original date 

of consumer purchase. For an additional year of coverage,* register 

your grinder with Fellow at register.fellowproducts.com. 

This warranty is valid only for:

The original consumer.

When the grinder is purchased through authorized retailers.

With the original sales receipt for proof of purchase to make  

your warranty claim.

This warranty does not include damage to the product resulting from:

Damage caused by accident, misuse, or customer mistakes from 

repairs that occur from not carefully following the instructions 

provided by Fellow.

Operation with the wrong type of current or voltage.

Failure to follow cleaning instructions for the grinder.

Failure to comply with any safeguards listed in the warnings  

and instructions of this document. 

Grinding anything other than whole roasted coffee beans  

or grinder cleaning tablets.

If the product should become defective within the warranty period, 

or you have questions regarding warranty or service, visit us at 

help.fellowproducts.com and submit a request.

*Available on electric products sold to US customers only.

Find more information at:  

Fellowproducts.com/pages/gear-guides

Содержание OPUS


























Отзывы: