background image

 

Page | 64

 

 

User Manual – FELIX Pro 1 

Rev 3 

www.FELIXprinters.com 
[email protected]

 

 
6. License, Copyright & Confidentiality 
a) Subject to these Terms and Conditions, you are granted a license to reproduce in order to install and execute the 
Software, Services and/or the data, information, functionality or other content (“Content”) provided to you as part of 
the Hardware or via for personal and private use only on the terms set out in this article 6 (“License”). You may install 
and use the Software, Services and Content on only one computer device at any time and in combination with only one 
Product. You may not provide the Software, Services or Content to others, directly or indirectly for their or anyone else’s 
use. This License is non-exclusive and non-transferable which means that FELIXprinters is free to license the Software, 
Services  and  Content  to  other  customers  and  that  your  right  to  use  the  Software,  Services  and  Content  cannot  be 
transferred by you to someone else or to another piece of Hardware. This License does not include any right to obtain 
future upgrades, updates or supplements to the Software, Services or Content. If upgrades, updates or supplements to 
the Software, Services or Content are obtained, however, the use of such upgrades, updates or supplements will be 
governed by these Terms and Conditions or such other terms and conditions as you shall be asked to accept prior to 
FELIXprinters supplying you with the relevant upgrade, update or supplement.  
b) FELIXprinters reserves the right, with or  without notice, to  discontinue  update, upgrade and supplement services 
provided to you or made available to you through the use of the Software, Services or Content, unless the provision of 
such updates, upgrades or supplements forms an integral part of the Product, as indicated by FELIXprinters at the time 
of sale.  
c) Without prejudice to any other rights, FELIXprinters may immediately terminate the License without notice of default 
being required if you fail to comply with any material term of these Terms and Conditions which shall be understood to 
include clauses 6 and 9. In such event, you must destroy all copies of the Software and all of its component parts as well 
as any Content.  
d) Copyright and other intellectual, industrial and/or proprietary rights to the Software, to the Content, the Services and 
to any copies made of it are owned by FELIXprinters and/or its suppliers. FELIXprinters permits you to use the Software, 
Services and Content only in accordance with these Terms and Conditions. All rights not specifically granted in these 
Terms and  
Conditions are reserved by FELIXprinters. You may either (a) make one copy of the Software solely for backup or archival 
purposes, or  (b) transfer the Software to a  single  medium provided the original  is kept  solely for backup or archival 
purposes.  Product  manual(s)  or  written  materials  may  not  be  copied,  except  for  your  own  use.  You  may  not  copy, 
download, upload or in any other way reproduce Content, except for creating one copy solely for backup or archival 
purposes. You do not acquire ownership of the Software or Content.  
e) You acknowledge and agree that the Products were developed at considerable time and expense by FELIXprinters 
and are confidential to, and a trade secret of, FELIXprinters and/or other third parties. You undertake to maintain the 
Products in strict confidence and not to disclose or provide access to the Product to any third party. 
 
7. Third Party Software Materials 
FELIXprinters Products may make use of third party software codes, data, information functionality, other content and 
algorithms (“Third Party Materials”). The use of Third Party Materials included in the Products may be subject to other 
terms and conditions. The official copyright notices and specific license conditions of these Third Party Materials are to 
be  found  in  or  via  our  website.  You  hereby  agree  that  the  submission  of  any  order  implies  that  you  have  read  and 
accepted the terms and conditions for any Third Party Materials included in the Products ordered. 
 
8. Other Restrictions 
Renting, lending, public presentation, performance or broadcasting or any other kind of distribution of the Products is 
prohibited. Other than as permitted by applicable legislation, you will not, and will not allow any person to, modify the 
Products or any part thereof, to analyze it by means of reverse engineering, to decompile or disassemble the Products, 
or to break or circumvent encryption or to allow or enable third parties to do so. 
 
9. Limited Warranty 
a) FELIXprinters does not and cannot warrant that the Products operate in a manner that is completely error-free nor 
that any information provided is always accurate. Calculation errors may occur when using systems such as those caused 
by local environmental conditions and/or incomplete or incorrect data.  
b) FELIXprinters offers a limited warranty that the Hardware will be free from defects in workmanship and materials 
under  normal  use  (“Defects”)  for  a  period  of  one  (1)  year  from  the  date  the  Hardware  was  purchased  (“Warranty 
Period”). Any warranty obligation of FELIXprinters under this Section is expressly conditioned on your compliance with 
this  Agreement.  During  the  Warranty  Period,  the  Hardware  will  be  repaired  or  replaced  by  FELIXprinters  (“Limited 
Warranty”) without charge for either parts or labor. If the Hardware is repaired after the Warranty Period has expired, 
the  Warranty  Period  for  the  repair  will  expire  six  (6)  months  after  the  date  of  repair.  This  warranty  does  not  cover 
Software or Services.  
c) This Limited Warranty does not cover damage caused by normal wear and tear or as a result of the Hardware being 
opened  or  repaired  by  someone  not  authorized  by  FELIXprinters,  and  does  not  cover  damage  caused  by:  misuse, 
moisture, liquids, proximity or exposure to heat and accident, abuse, non-compliance with the instructions supplied with 

Содержание Felix Pro 1



































































Отзывы: