Felisatti F81017, Руководство пользователя

Страница: 23 / 26

23
screw securely.
To remove wheel guard, follow the installation procedurein reverse.
Installing or removing depressed centergrinding wheel/Multi-disc
WARNING:
•
Always use supplied guard when depressedcentergrinding wheel/Multi-disc is on
tool.Wheel canshatter during use and guard helps
to reducechances of personal injury.
Mount the inner flange onto the spindle. Fit the
wheel/disc on the inner flange and screw the lock
nut onto thespindle.
To tighten the lock nut, press the shaft lock firmly
so thatthe spindle cannot revolve, then use thelock nut wrenchand securely tighten
clockwise.
To remove the wheel, follow the installation procedure inreverse.
Installing or removing diamond wheel(optional
accessory)
CAUTION:
• Always install the wheel guard before installing
thediamond wheel.
• When mounting the wheel ensure that the
arrow(indicating the direction of rotation) on the wheel ispointing in the same direction as
the arrow forrotation provided on the tool.
Mount the inner flange onto the spindleso thatthe side of the inner flange with the protrusion
faces the diamond wheel. Place thediamond wheel onto the inner flangemaking sure
theprotrusion fits into the arbor of the wheel. Use the locknut to secure the wheel by placing
it on the spindle sothat the flat side faces the wheel and screw the lock nutonto the spindle.
To tighten the lock nut, press the shaftlock firmly so that the spindle cannot revolve, then
usethe lock nut wrench and securely tighten clockwise.
Installing or removing abrasive disc(optional accessory)
NOTE:
•
Use sander accessories specified in this manual.These must be purchased separately.
Mount the rubber pad onto the spindle.Fit the disc on therubber pad and screw the lock nut
onto the spindle.
Totighten the lock nut, press the shaft lock firmly
so that thespindlecannot revolve, then use the
lock nut wrenchandsecurely tighten clockwise.
To remove the disc, follow the installation
procedure inreverse.
OPERATION
WARNING:
•
It should never be necessary to force the tool. Theweight of the tool applies adequate
pressure.Forcing and excessive pressure could causedangerous wheel breakage.
•
ALWAYS replace wheel if tool is dropped whilegrinding.
•
NEVER bang or hit grinding disc or wheel ontowork.
•
Avoid bouncing and snagging the wheel, especiallywhen working corners, sharp edges etc.
This cancause loss of control and kickback.
•
NEVER use tool with wood cutting blades and othersawblades. Such blades when used
on a grinderfrequently kick and cause loss of control leading topersonal injury.