29
OPERATION
Screwdriving operation
Place the point of the driver bit in the screw head and apply pressure to the
tool. Start the tool slowly andthen increasethe speed gradually. Release the
switch trigger as soon asthe clutch cuts in.
NOTE:
•
Make sure that the driver bit is inserted straight in the screw head, or the screw and/or bit
may be damaged.
•
When driving wood screws, predrill pilot holes to make driving easier and to prevent
splitting of the workpiece.
•
If the tool is operated continuously until the battery cartridge has discharged, allow the tool
to rest for 15 minutes before proceeding with a fresh battery.
Drilling in wood
When drilling in wood, the best results are obtained withwood drills
equipped with a guide screw. The guide screwmakes drilling easier by
pulling the bit into the workpiece.
Drilling in metal
To prevent the bit from slipping when starting a hole, makean indentation
with a center-punch and hammer at the pointto be drilled. Place the point
of the bit in the indentation andstart drilling.
Use a cutting lubricant when drilling metals. The exceptionsare iron and brass
which should be drilled dry.
CAUTION:
•
Pressing excessively on the tool will not speed up thedrilling. In fact, this excessive
pressure will only serve todamage the tip of your bit, decrease the toolperformance
and shorten the service life of the tool.
•
There is a tremendous force exerted on the tool/bit at thetime of hole break through. Hold
the tool firmly and exertcare when the bit begins to break through the workpiece.
•
A stuck bit can be removed simply by setting thereversing switch to reverse rotation in
order to back out.However, the tool may back out abruptly if you do nothold it firmly.
•
Always secure small workpieces in a vise or similar hold-downdevice.
•
If the tool is operated continuously until the batterycartridge has discharged, allow the tool
to rest for 15minutes before proceeding with a fresh battery.
Содержание DS-10/14,4L2
