Felisatti DS-10/14,4L2, Руководство по эксплуатации и инструкции по безопасности

Страница: 28 / 31

28

Change torque settings
The torque settings can be selected in 20 levels by rotating the torque cup so
that its graduations arealigned with thepointer on the tool body.
Caution:
• The torque cupshall not lock when the pointer ispositioned only halfway between the
graduations.
• Do not operate the tool with the torque setting between the number mark and the Drill
Mark. The toolmay be damaged.

ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and thebattery cartridge is removed before
carrying out anywork on the tool.

Installing or removing driver bit or drill bit
1. Hold the ring and turn the sleeve counterclockwise to open the chuck jaws.
Place the bit in the chuck as faras it will go. Hold the ring firmly and turn the
sleeve clockwise to tightenthe chuck.
2. To remove the bit, hold the ring and turn the sleeve counterclockwise.