Felisatti DS-10/14,4L2, Руководство по эксплуатации и инструкции по безопасности

Страница: 21 / 31

21
ADDITIONAL SAFETY RULES
1. Hold tool by insulated gripping surfaces when performing an operation where
the drilling tool may contact hidden wiring. Contact with a “live” wire will also
make exposed metal parts of the tool “live” and shock the operator.
2. Be aware that this tool is always in anoperating condition, because it does
nothave to be plugged into an electrical outlet.
3. Always be sure you have a firm footing.
4. Be sure no one is below when using thetool in high locations.
5. Hold the tool firmly.
6. Keep hands away from rotating parts.
7. Do not leave the tool running. Operate thetool only when hand-held.
8. Do not touch the drill bit or the workpieceimmediately after operation; they may
beextremely hot and could burn your skin.
9. Some material contains chemicals whichmay be toxic. Take
caution to preventworking dust inhalation and skin contact.
Please follow material supplier safety instructions.
10.Use and store all devices out of reach from children.
11.Wear protection equipment such as ear protector. Exposure to
noise may cause hearing loss.
WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause
serious personal injury.
SAFETY INSTRUCTIONS FORCHARGER & BATTERY PACK
SAVE THESE INSTRUCTIONS
- This manualcontains important safety and
operatinginstructions for battery charger.Before using battery charger, read
allinstructions and cautionary markings on(a) battery charger, (b) battery pack, and
(c)product using the battery.
The user bears sole responsibility for damagecaused by improper
use.
1. To reduce risk of injury, chargeonly FELISATTI rechargeable
batteriesmarked on the charger label. Charging other typesof battery may
cause burst that lead to personalinjury or damage.
2. The charger is designed for indoor use ONLY. Do not expose charger
to rain or snow.
3. Use of an attachment not recommendedor sold by the battery charger
manufacturermay result in a risk of fire, electricshock, or injury to persons.
4. To reduce risk of damage to electric plugand cord, pull the plug rather than the
cordwhen disconnecting charger.
5 . Charger plugs must match the outlet. Never modifythe plug in any way. Do not
use any adapter plugs withearthed (grounded) devices. Unmodified plugs
andmatching outlets will reduce risk of electric shock.
6. Make sure cord is properly located so that it willnot be stepped on, tripped over,
or otherwisesubjected to damage or stress.
7. Do not operate charger with damagedcord or plug.