Felder Hammer, Руководство по установке

Страница: 37 / 104

The
Fast-Track to Machining
Before the machine left the factory in Austria, all possible adjustments on the
machine had been made and checked. A complete overhaul will therefore not be
necessary! However, for peace of mind there are several basic checks which you can
make that will verify that after the transport, delivery, assembly and positioning has
been done, the machine still works accurately. Follow these links:
Saw
s
1. 90° Crosscut Fence, (SS05)
2. 45° Crosscut Fence, (SS08)
3. Angle of Sawblade at 90° (both sides) (SR07)
4. Angle of Sawblade at 45° (both sides) (SR08)
5. Rip fence scale (SR09)
6. Crosscut scale (SS07)
7. Cut quality. The cut should be clean, with no breakout on the top surface and
none on the bottom when using the scoring blade. The cut should only be
made at the front of the blade, not by the teeth at the back of the saw blade.
Shaper
s
1. 90° Spindle to cast iron (SH02)
2.
45° Spindle to cast iron table (SH03)
Joiner
s
1. Join two boards: Convex or straight (JR06)
2. No snipe (JR07)
3. Cut quality. The finish should be smooth, the surface flat and unmarked.
Planer
s
1. Equal thickness on both sides of the table (PL01)
2. No snipe (PL02)
3. Cut quality. The finish should be smooth, the surface flat and unmarked.
You can navigate back here using the Basic icon:
You can find the adjustment info by following the Wrench icon:
You can then navigate back to the Alignment using the Dial icon:
Checks
Machine
12.Basic
3 . Cut quality. The finish should be uniform along the length of the workpiece.
Finished? Click Here