4
5
Saw-Spindle Moulder
B3
Saw-Spindle Moulder
B3
9.7
Working techniques .....................................................................................57
9.7.1
Permitted working techniques.........................................................................57
9.7.2
Prohibited working techniques .......................................................................57
9.7.3
General procedures for authorised working techniques .....................................58
9.7.4
Trimming.....................................................................................................58
9.7.5
Longitudinal cut ...........................................................................................59
9.7.6
Cutting wedges............................................................................................59
9.7.7
Cutting with an outrigger ..............................................................................60
9.7.8
Cutting with the crosscut fence .......................................................................61
9.7.9
Groove cuts.................................................................................................61
9.7.10
Working with grooving tools..........................................................................62
9.7.11
Moulding long sides.....................................................................................63
9.7.12
Moulding profiles.........................................................................................63
9.7.13
Slot and tenon moulding ...............................................................................64
9.7.14
Insert moulding ............................................................................................64
9.7.15
Curve moulding ...........................................................................................65
9.7.16
Moulding with a power feeder.......................................................................66
9.7.17
Moulding with a high velocity spindle.............................................................67
10 Maintenance ..................................................................................................................... 68
10.1
Safety instructions ........................................................................................68
10.2
Maintenance schedule ..................................................................................68
10.3
Cleaning the bearing tracks...........................................................................69
10.4
Lubricating the circular saw height spindle and tilting spindle.............................69
10.5
Tightening/replacing the drive belt.................................................................70
10.5.1
Retensioning the drive belt.............................................................................70
10.5.2
Replacing the drive belt ................................................................................70
10.6
Checking the scoring belt ..............................................................................71
10.7
Cleaning/changing the dust brush of the outrigger arm ....................................71
10.8
Renewing the sliding table scraper blade (ball cage) ........................................72
10.9
Disassembling the sliding table ......................................................................72
10.10
Assembling the sliding table ..........................................................................73
10.11
Lubricating the spindle moulder socket and tilting segments ...............................74
11 Faults
......................................................................................................................... 75
11.1
Safety instructions ........................................................................................75
11.2
What to do if a fault develops .......................................................................75
11.3
What to do after rectifying the fault ................................................................75
11.4
Faults, causes and repairs .............................................................................76
11.5
Aligning the sliding table ball cage ................................................................76
11.6
Adjusting the parallel cutting fence guide height ..............................................76
11.7
Adjusting/correcting the parallel cutting fence angle.........................................77
11.8
Adjusting the locking force of the parallel cutting fence .....................................77
12 Index ................................................................................................................................ 78
Table of Contents
