![background image](http://html1.mh-extra.com/html/feiyu-tech/scorp-pro/scorp-pro_instructions-manual_549867011.webp)
- 8 -
4. Gimbal Balancing
Please balance the gimbal before shooting. Make sure the camera
and lens are ready for shooting, and the gimbal is powered off or in
sleep mode before balancing.
It is recommended to hold up the
camera first, then move the slide arm, cross arm and vertical
arm.
Take horizontal mounting as a example.
Tutorial Videos
4.1 Balancing the tilt axis
4.1.1 Balancing the vertical tilt
a. Toggle the tilt lock levers
①
to the unlocked
position, and loosen the slide arm lock
knob
②
.
b. Rotate the tilt axis so that the camera lens is
pointing upward. Check the direction which the
lens tilts to.
c. If the lens tilts to one side, then the camera
is that side heavy, move the slide arm
③
to the
opposite direction, until the camera is steady
pointing upward.
d. Tighten the slide arm lock knob
②
while
holding the camera.
3
2
1
4.1.2 Balancing depth for the tilt axis
a. Rotate the tilt axis so that the camera
lens is pointing forward. Check the
direction which the lens tilts to.
b. If the lens tilts to one side, then the
camera is that side heavy, unlock the quick
release plate safety lock
①
and then move
the quick release plate to the opposite
direction, until the camera is steady
pointing forward.
c. Lock the quick release plate safety
lock
①
while holding the camera.
2
1
The tilt axis is balanced when the camera is steady while tilted up or down by 45° .
Содержание SCORP PRO
Страница 1: ...Instructions V 1 1 Tutorial Videos ...