Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: [email protected] Page 16
(2)Gimbal Gain
The default Gimbal Gain:Roll 50,Pitch 50.
Under the condition of servo no rotation, you should control the camera gimbal with
RC stick. If the servo shaking when the stick in the neutral position, that’s indicates the
sensitivity is too big. As a result, you should slowly decrease(10% -20% each time)
corresponding direction Gimbal Gain, until the shaking situation disappear.If the camera
gimbal go back to Neutral is too soft, As a result, you should slowly increase(10% -20%
each time) corresponding direction Gimbal Gain
(3)Gimbal Neutral
The default Gimbal Neutral is 1520.
Power on and put the camera gimbal into level position,observe the servos position.If
the servos is not in the Neutral value,please through adjust the to corresponding servos
Gimbal Neutral to make them into Neutral value position.
Adjusting method:
According to corresponding servo reaction,
appropriate increase or
decrease corresponding servo Gimbal Neutral.
——
END
——
Note: We reserve the right to change this manual at any time! And the newest edition
will be shown on our website www.feiyudz.cn.
