FEISHEN K550ATV EEC 4x4, Руководство пользователя

Страница: 82 / 102

1. Place vehicle on a level surface;
2. Run engine two or three minutes until warm, stop engine;
3. Clean area around drain plug;
4. Place a drain pan beneath engine crankcase and remove drain plug;
5. Allow oil to drain completely;
6. Replace sealing washer O-ring of drain plug;
7. Reinstall drain plug and torque to 14 ft. lbs. (19 Nm).
Front Gear Case Oil
Always check and change the front gear case oil at the intervals outlined in “16.
Maintenance”. Maintain the oil level even with the bottom of the fill hole threads (1).
The correct gear case lubricant to use is SAE 15W/40SG. Use of other oils may result
in improper operation of components.
Oil Check
1. Position the vehicle on a level surface.
2. Remove the fill plug (2) and view the
oil level.
1. Add the recommended gear case oil as
needed to bring the level to the bottom
of the fill hole threads.
4. Reinstall the fill plug. Torque to 14 ft. lbs. (19 Nm).