8. STARTING THE ENGINE
Procedure for Starting a Cold Engine
WARNING
Never run an engine in an enclosed area. Carbon monoxide exhaust gas is poisonous
and can cause severe injury or death. Always start engines outdoors.
CAUTION
You must allow your vehicle adequate warm up time before operating or engine
damage could result.
1. Place the transmission in neutral and reset the parking brake.
2. Turn the fuel tank valve to ON.
3. Sit on the vehicle.
4. Turn the engine stop switch to RUN.
5. Turn the main switch on, wait until the EPC indicator is off, apply the brake lever
and press the starter button.
6. Do not press the throttle while starting the engine.
7. Activate the starter for a maximum of five seconds, releasing the button when the
vehicle starts. If engine does not start, release the starter for another five seconds.
Repeat this procedure until the engine starts.
CAUTION
This ATV only equipped with an electric start system. If the battery is under charging,
the ATV will not run.
Содержание K550ATV EEC 4x4
