FEISHEN K550ATV EEC 4x4, Руководство пользователя

Страница: 44 / 102

9. VEHICLE BREAK-IN PERIOD
The break-in period for your new ATV is defined as the first 50 hours of
operation. No single action on your part is as important as a proper break-in period.
Careful treatment of a new engine will result in more efficient performance and
longer life for the engine. Perform the following procedures carefully.
CAUTION
Do not operate at full throttle or high speeds for extended periods during the break-in
period. Excessive heat can build up and cause damage to close fitted engine parts.
Please set a limit to
half throttle during
the break-in periods.
1. Locknut 2. Adjuster
1. Fill the fuel tank.
2. Check the oil reservoir level indicated on the dipstick. Add oil if necessary.
3. Drive slowly at first. Select an area which is open and will give you room to
familiarize yourself with vehicle operation and handling.
4. Vary the throttle positions. Do not operate at sustained idle.
5. Perform regular checks on fluid levels, controls and all important areas on the
vehicle as outlined earlier on the daily pre-ride inspection checklist found in “4. Daily
pre-ride inspection”.
6. Pull only light loads.