background image

5

en

c) When battery pack is not in use, keep it 

away from other metal objects, like 
paper clips, coins, keys, nails, screws or 
other small metal objects, that can 
make a connection from one terminal to 
another. 

Shorting the battery terminals 

together may cause burns or a fire.

d) Under abusive conditions, liquid may be 

ejected from the battery; avoid contact. 
If contact accidentally occurs, flush 
with water. If liquid contacts eyes, addi-
tionally seek medical help. 

Liquid 

ejected from the battery may cause irri-
tation or burns.

e) Do not use a battery pack or tool that is 

damaged or modified. 

Damaged or 

modified batteries may exhibit unpre-
dictable behaviour resulting in fire, 
explosion or risk of injury.

f) Do not expose a battery pack or tool to 

fire or excessive temperature. 

Exposure 

to fire or temperature above 130 °C 
may cause explosion.

g) Follow all charging instructions and do 

not charge the battery pack or tool out-
side the temperature range specified in 
the instructions. 

Charging improperly 

or at temperatures outside the specified 
range may damage the battery and 
increase the risk of fire.

6) Service

a) Have your power tool serviced by a qual-

ified repair person using only identical 
replacement parts. 

This will ensure that 

the safety of the power tool is main-
tained.

b) Never service damaged battery packs. 

Service of battery packs should only be 
performed by the manufacturer or 
authorized service providers.

OBJ_BUCH-0000000371-001.book  Page 5  Wednesday, February 20, 2019  9:29 AM

Содержание ASCM18QM Series





















Отзывы: