background image

7

en

Handling hazardous dusts.

When working with power 
tools, such as when grinding, 

sanding, polishing, sawing or for other work 
procedures where material is removed, dusts 
develop that are both hazardous to one’s 
health and can spontaneously combust or be 
explosive.

Contact with or inhaling some dust types can 
trigger allergic reactions to the operator or 
bystanders and/or lead to respiratory infec-
tions, cancer, birth defects or other reproduc-
tive harm.

Examples of such materials which contain 
chemicals that can produce hazardous dusts, 
are:

Asbestos and materials containing asbes-
tos;

Lead-containing coatings, some wood 
types such as beech and oak;

Minerals and metal;

Silicate particles from bricks, concrete and 
other materials containing stone;

Solvent from solvent-containing paint/
varnish;

Arsenic, chromium and other wood pre-
servatives;

Materials for pesticide treatment on boat 
and ship hulls;

Stainless steel dust, metal dust and non-
ferrous metal dust;

To minimize the unwanted intake of these 
materials:

Use dust extraction matched appropriately 
for the developing dust.

Use personal protective equipment, such 
as a P2 filter-class dust protection mask.

Provide for good ventilation of the work-
place.

The risk from inhaling dusts depends on how 
often these materials are worked. Materials 
containing asbestos may only be worked on 
by specialists.

Wood and light-metal dust 
can cause spontaneous com-

bustion or explosions.

Hot mixtures of sanding dust and paint/var-
nish remainders or other chemical materials 
in the filter bag or the vac filter can self-ignite 
under unfavorable conditions, such as spark-
ing from sanding metal, continuous sunlight 
or high ambient temperatures. To prevent 
this:

Avoid overheating the material being 
sanded and the power tool.

Empty the dust collector/container in time.

Observe the material manufacturer’s 
working instructions.

Observe the relevant regulations in your 
country for the materials being worked.

Hand/arm vibrations.

While working with this power 
tool, hand/arm vibrations 

occur. 

These can lead to health impairments.

The vibration emission value 
during actual use of the power 

tool can differ from the declared value 
depending on the ways in which the tool is 
used.

It is necessary to identify 
safety measures to protect the 

operator that are based on an estimation of 
exposure in the actual conditions of use.

The vibration emission level given in this 
information sheet has been measured in 
accordance with a standardized test given in 
EN 62841 and may be used to compare one 
tool with another. It may be used for a pre-
liminary assessment of the vibrational impact.
The declared vibration emission level repre-
sents the main applications of the power tool. 
However, if the power tool is used for other 
applications with different accessories or 
poorly maintained, the vibration emission 
may differ.  This may significantly increase the 
vibrational impact over the total working 
period.
An estimation of the level of exposure to 
vibration should also take into account the 
times when the tool is switched off or when 

WARNING

CAUTION

WARNING

WARNING

WARNING

OBJ_BUCH-0000000371-001.book  Page 7  Wednesday, February 20, 2019  9:29 AM

Содержание ASCM18QM Series





















Отзывы: