19
en
Positioning the tool (figure 7).
The application tool can be offset in 30°
steps and fastened in the most favorable
working position.
Ejecting the application tool
(figure 8).
To eject the application tool and have the
starting position set, move the clamping
lever back to the stop; in this, the application
tool is also released.
Pay attention that the application tool is
seated straightly the tool holder.
For all work or when changing applica-
tion tools, always wear protective
gloves.
Danger of injury from the sharp
edges of the application tools. Application
tools can become very hot while working.
Danger of burns!
3.
0°
30°
60°
90°
90°
60°
30°
180°
4.
2.
1.
Fig. 7
180°
4.
2.
3.
1.
4.
Fig. 8
