18
en
Changing the tool.
Before mounting or replacing application tools or accessories, remove the
battery.
This preventive safety measure rules out the danger of injuries
through accidental starting of the power tool.
For all work or when changing application tools, always wear protective
gloves.
Danger of injury from the sharp edges of the application tools. Appli-
cation tools can become very hot while working. Danger of burns!
Do not switch the power tool
on while the clamping lever
is open.
Otherwise there is danger of
crushes or contusions to the hand and fin-
gers.
Do not actuate the clamping
lever while the power tool is
running.
Otherwise there is danger of injury.
Do not reach into the area of
the clamping jaws.
Other-
wise there is danger of crushes or contu-
sions to the fingers.
Do not operate the power tool
with open clamping jaws and
without an application tool!
This could dam-
age the power tool.
When the clamping jaws are
open before the application
tool is inserted, pivot the clamping lever
toward the front and then back again.
The
clamping jaws are closed now. The applica-
tion tool can be inserted.
Inserting the application tool
(figure 6).
Clean the tool holder and the application
tool.
In the starting position, the clamping jaws in
the tool holder are together. In this position,
the application tool can be clipped-in easily.
WARNING
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
2.
3.
1.
Fig. 6
