19
en
Cutter blades for automobile glazing
applications (figure 7).
Guide the straight, bent or offset cutter
blades at a right angle to the window flange;
blade A – D.
For U-shaped cutter blades, pay attention
that the traverse of the cutter blade is led
parallel to the window pane of the vehicle;
blade E – F.
The scraper knife is used for cutting back
bond remainders on the window flange or
the pane. Before re-bonding the vehicle
window, cut back the remaining bead to a
height of approx. 2 mm; blade G.
Cutter blades marked with a symbol may
only be operated as indicated.
C
A
B
D
E
F
G
Fig. 7
Symbol on the cutting blade
