Fein AGSZ18-280BL, Руководство пользователя

Страница: 20 / 234

20
en
For your safety.
Read all safety warnings and all
instructions.
Failure to follow the
warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
Do not use this power tool before you have thor-
oughly read and completely understood this
Instruction Manual and the enclosed “General
Safety Instructions” (document number
3 41 30 054 06 1). The documents mentioned should be
kept for later use and enclosed with the power tool,
should it be passed on or sold.
Please also observe the relevant national industrial safety
regulations.
Intended use of the power tool:
Hand-guided straight grinder for dry grinding of metal
with small grinding accessories (grinding points) for shap-
ing metal with hard metal cutters and for cut-off grinding.
AGSZ18-90 LBL: This power tool is additionally
intended for wire-brushing and polishing in weather-pro-
tected environments with the accessories recommended
by FEIN.
Safety warnings common for grinding, wire brush-
ing, polishing, carving, sanding or abrasive cut-
ting-off operations:
AGSZ18-280 BL, AGSZ18-280 LBL: This power tools are
intended to function as a grinder, carving or cut-off tools.
AGSZ18-90 LBL: This power tool is intended additionally
to function as a wire brush or polisher.
Read all safety warnings, instructions, illustrations and
specifications provided with this power tool.
Failure to
follow all instructions listed below may result in electric
shock, fire and/or serious injury.
AGSZ18-280 BL, AGSZ18-280 LBL: Operations such as
sanding, wire brushing or polishing are not recommended
to be performed with this power tools.
Character Unit of measurement,
international Unit of measure-
ment, national Explanation
n
/min, min
-1
, rpm, r/min rpm Rated speed
n
0
/min, min
-1
, rpm, r/min rpm No-load speed
P
1
W W Power input
P
2
W W Output
U
V V Rated voltage
f
Hz Hz Frequency
M...
mm mm Size of metric thread
Ø mm mm Diameter of a round part
mm mm Ø
D
=Max. diameter of grinding wheel
mm mm Ø
D
=Max. diameter of hard metal cutter
mm mm Ø
D
=Max. diameter of polishing tools
kg kg Weight according to EPTA-Procedure 01
kg kg Weight of the power tool without battery
and application tool
kg kg Weight of the battery
L
pA
dB dB Sound pressure level
L
wA
dB dB Sound power level
L
pCpeak
dB dB Peak sound pressure level
K...
Uncertainty
m/s
2
m/s
2
Vibrational emission value according to
EN 60745 (vector sum of three directions)
h,SG
m/s
2
m/s
2
Vibrational emission value (surface grinding
with straight grinder)
h,P
m/s
2
m/s
2
Vibrational emission value (polishing with
straight grinder)
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
min, m/s
2
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
min, m/s
2
Basic and derived units of measurement from
the international system of units
SI .
WARNING
OBJ_BUCH-0000000285-001.book Page 20 Monday, February 19, 2018 10:27 AM