Repair instructions
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
C-SC_CSSM
2012.07
18/40
6. Disassembly
Tool:
-Flat-nose pliers
1. Holding the electronic strip by the reinforcement, gently pull it out of the plug.
2. Unclip the LED with the electronic strip from the holder.
NOTE
If the electronic strip is defective, the replacement strip must be kinked slightly at the same
place. The kink is located between the two notches on the electronic strip.
