Repair instructions
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
C-SC_CSSM
2012.07
35/40
There is a small spring under the slide switch for switching the torque off. The spring presses the
slide switch into its original position.
The spring must sit between the rear projection of the slide switch and the housing wall.
1. Tension the spring with a small screwdriver.
2. Insert the slide switch.
NOTE
You must hold the slide switch down permanently as you continue with the assembly, otherwise it
and the spring will come out again.
7. Assembly
Tool:
- Small slotted screwdriver
