Feig Electronic OBID i-scan ID ISC.MRU200i, Руководство по установке

Страница: 36 / 52

OBID i- scan
®
Installation ID ISC.MRU200
FEIG ELECTRONIC GmbH Page 36 of 52 M80401-3de-ID-B.doc
E
N
G
L
I
S
H
Fig. 4-2: Terminals, jacks and operating elements of Type -E
4.1 Supply Voltage
Connect the 12...24 VDC supply voltage to Terminal X1.
Table 4-1: Supply voltage pin assignments
Terminal Abbreviation Description
X1 / Pin 1 VDC Vcc
– supply voltage (+)
X1 / Pin 2 GND Ground
– supply voltage (-)
Fig. 4-3: Connecting the supply voltage
The output power of the power supply should be at least 15 W.
At all installation according to UL 60950 or EN 60950,
this unit has to be supplied by a Listed NEC Class 2/LPS supply, only.
by use of flexible cords, the NEC rules according article 400.7 (8) and 400.8 (1)-(7) must be
applied.
Note:
Reversing the polarity of the supply voltage may destroy the unit.
G
N
D
X7
X1
VDCG ND
X1
VDC
GND