Feig Electronic OBID i-scan ID ISC.MRU200i, Руководство по установке

Страница: 31 / 52

OBID i- scan
®
Installation ID ISC.MRU200i
FEIG ELECTRONIC GmbH Page 31 of 52 M80401-3de-ID-B.doc
E
N
G
L
I
S
H
1 Safety Instructions / Warning - Read before start-up !
The device may only be used for the intended purpose designed by for the manufacturer.
When installing the device in areas covered under FCC 47 CFR Part 15 a minimum separation
of 23 cm (9 inch) between antenna and the human body must be maintained.
The operation manual should be conveniently kept available at all times for each user.
Unauthorized changes and the use of spare parts and additional devices which have not been
sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such
unauthorized measures shall exclude any liability by the manufacturer.
The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid
for the device. The manufacturer shall not be held legally responsible for inaccuracies, errors,
or omissions in the manual or automatically set parameters for a device or for an incorrect
application of a device.
Repairs may only be executed by the manufacturer.
Installation, operation, and maintenance procedures should only be carried out by qualified
personnel.
Use of the device and its installation must be in accordance with national legal requirements
and local electrical codes .
When working on devices the valid safety regulations must be observed.
Special advice for wearers of cardiac pacemakers:
Although this device doesn't exceed the valid limits for electromagnetic fields you should
keep a minimum distance of 25 cm (10 inch) between the device and your cardiac pacemak-
er and not stay in the immediate proximity of the device’s antenna for any length of time.