Feig Electronic OBID i-scan ID ISC.MRU200i, Руководство по установке

Страница: 40 / 52

OBID i- scan
®
Installation ID ISC.MRU200
FEIG ELECTRONIC GmbH Page 40 of 52 M80401-3de-ID-B.doc
E
N
G
L
I
S
H
4.3.3 Ethernet Interface (ID ISC.MRU200i-E)
The Reader has an integrated 10 / 100 base-T network port for an RJ45. Connection is made on
X7. With structured cabling Cat 5 cables should be used. This ensures reliable operation at
10 Mbps or 100 Mbps.
Table 4-5: Ethernet interface pinouts
Terminal Abbreviation Description
X7 / Pin 1 TX+ Transmit Data +
X7 / Pin 2 TX- Transmit Data -
X7 / Pin 3 RX+ Receive Data +
X7 / Pin 4 VETH+ n.c.
X7 / Pin 5 VETH+ n.c.
X7 / Pin 6 RX- Receive Data -
X7 / Pin 7 VETH- n.c.
X7 / Pin 8 VETH- n.c.
The prerequisite for using TCP/IP protocol is that each device has a unique address on the net-
work. All Readers have a factory set IP address..
Table 4-6: Standard configuration of the Ethernet connection
Network Address
IP-Address 192.168.10.10
Subnet-Mask 255.255.255.0
Port 10001
Note:
The readers must be connected to the network and configured one after the other. Every IP-
Address must be used only one time. Alternatively this configuration can be done with the
asynchronous interface
.