![background image](http://html.mh-extra.com/html/feig-electronic/obid-i-scan-id-isc-ant1400-760/obid-i-scan-id-isc-ant1400-760_application-note_548938027.webp)
OBID i-scan
®
Application Note
ID ISC.ANT1400/760-C/B
FEIG ELECTRONIC GmbH
Page 27 of 31
N70100-0de-ID-B.doc
E N G L I S H
2.3.4 Reader Configuration
To tune the antennas, open the ISOStart software and first read out the current configuration of the
Reader:
Step
Action
Note
1
Start ISOStart Software
2
Run „Detect“...
3
...follow „New-File
Assistant“...
4
...and read out the current
Reader Configuration
Then set the operating power, Transponder Parameters and ISO Host Mode:
Step
Action
Note
1
Select “Configuration”
2
CFG3: RF-Interface
“RF-POWER” (here 8W)
Select “Transponders-Drivers”
(here ISO 15693)
3
Set by clicking on “Write”
4
CFG4:
Transponder Parameters
Configure the parameters as
follows (ISO15693 Mode):
•
„Datacoding“ – 1 of 4
•
„MOD“ – 10%
•
„SUB-CARRIER“ – ASK
•
„DATA-RATE“ – High
•
„NO-TS“ – 1 Timeslot
•
„AFI“ – Disabled
Note: National RF regulations may require different
settings. (see M50700-4e-ID-B.doc)
5
Set by clicking on “Write”