![background image](http://html.mh-extra.com/html/feig-electronic/obid-i-scan-id-isc-ant1400-760/obid-i-scan-id-isc-ant1400-760_application-note_548938021.webp)
OBID i-scan
®
Application Note
ID ISC.ANT1400/760-C/B
FEIG ELECTRONIC GmbH
Page 21 of 31
N70100-0de-ID-B.doc
E N G L I S H
2
Typical Antenna Configuration
The standard configuration of a gate with three-dimensional tag orientation consists of an
ID ISC.ANT1400/760 Type C antenna and 2 to 4 ID ISC.ANT1400/760 Type B or BL antennas.
The correct assembly of the different antennas and the right cable lengths are described below.
2.1 Set-up of the antennas
The antennas have to be set-up as follows. The antenna Type C should be mounted in the middle
of the gates to avoid an extension of the antenna-cables. From 3 antennas Type B you can’t avoid
to extend the cable. The following schematics show the various set-ups.
The connections of the antennas to multiplexer are described in Table 4: Connecting the antennas
2 Aisles (3 antennas)
3 Aisles (4 antennas)
4 Aisles (5 antennas)
Typ B1
Typ C
Typ B2
3,6m-cable
Typ B1
Typ C
Typ B2
3,6m-cable
Typ B3
3,6m+7,2m-cable
Typ B2
Typ C
Typ B3
3,6m-cable
Typ B4
3,6m+7,2m-cable
Typ B1
3,6m+7,2m-cable