Feig Electronic OBID i-scan ID ISC.ANT.MUX, Руководство пользователя

Страница: 19 / 27

OBID i-scan
®
Manual Communication FU
FEIG ELECTRONIC GmbH Page 19 of 27 H30701-3e-ID-B
3.2.2. [0xC1]: CPU-Reset
This protocol is used to perform a CPU reset on the antenna tuner. After this protocol the Tuner
cannot receive protocols for the next 200 ms.
Host
→
Tuner
CMD Data
[0xC1]
Tuner-Adr
1
0x02
8 bits
0xFE
8 bits
Host
←
Tuner
Data
STATUS
2
0x00 8 bits
3.2.3. [0xC2]: Set Capacities
This protocol is used to switch the capacities C1 and C2 of the antenna tuner. To get the current
capacity settings send [0xC3] “Get Antenna Values” to the tuner.
Host
→
Tuner
CMD Data
[0xC2]
Tuner-Adr
3
C1 C2
0x02 8 bits 0xFE 8 bits 8 bits 8 bits
Host
←
Tuner
Data
STATUS
4
0x00 8 bits
C1:
Value for C1: 0x00 bis 0x7F
C2:
Value for C2: 0x00 bis 0x7F
Settings for the capacities C1 or C2 greater than 0x7F are rejected and acknowledged with
STATUS 0x11 (Parameter Range Error).
A setting of 0x00 overwrites the current capacity setting.
1
see 3.1. System Description of the Antenna Tuner
2
see APPENDIX A: Index STATUS
3
see 3.1. System Description of the Antenna Tuner
4
see APPENDIX A: Index STATUS