Feig Electronic ID ISC.MRMU102-A, Руководство пользователя

Страница: 52 / 64

OBID i-scan
®
Montage / Installation ID ISC.MRU102
FEIG ELECTRONIC GmbH Seite 30 von 42 M20110-1de-ID-B.doc
12.1 Antenna Terminal ANT 1
A SMA socket (ANT1) is provided on the circuit board for connecting the external antenna. The
maximum tightening torque for the SMA socket is 0.45 Nm.
Caution:
•
Higher tightening torque will damage the connector.
Terminal Description
ANT1 Connecting the external antenna
(input impedance 50
Ω )
Table 3: Connecting the external antenna
Note:
•
When connecting an antenna, ensure that it does not exceed the permissible limits
pre-scribed by the national regulations for radio frequency devices.
12.2 Internal Antenna ANT4
Additionally the reader is equipped with an internal antenna (ANT4). The internal antenna supports
far field transponders as well as near field transponders. The internal antenna is located in the bot-
tom left corner of the housing and is marked with an antenna symbol. The maximum read range of
the antenna in combination with a far field transponder is approx. 40 cm. In combination with a
near field transponder the maximum read range is approx. 5 cm.
Figure 3: Position of the internal antenna