OBID
i-scan
®
UHF
Installation
ID ISC.LRU3000/3500
FEIG ELECTRONIC GmbH
Page 20 of 32
M21016-3e-ID-B
Figure 16: Internal and possible external wiring of the optocoupler-outputs OUT1-2
CAUTION:
The output is configured for max. 24 V DC / 30 mA.
Polarity reversal or overload on the output will destroy it.
The output is intended for switching resistive loads only.
4.5.2. Relay outputs on connector X5
There are 3 relay outputs available on connector X5.
Figure 17: Relay output pin-outs REL1-3