OBID
i-scan
®
UHF
Installation
ID ISC.LRU3000/3500
FEIG ELECTRONIC GmbH
Page 14 of 32
M21016-3e-ID-B
The USB-Port X4 can be used for a standard WLAN-USB-Stick
Figure 7: USB-Interface for external WLAN stick
NOTE:
WLAN shall not be used when the reader is powered via Power over Ethernet (PoE)
The following table gives an overview about successfully tested Wireless LAN Sticks
Table 9: Successfully tested WLAN Sticks
Manufacturer
Description
Model
Buffalo
Wireless-N NFiniti High Power
WLI-UC-G300HP
Buffalo
Wireless –N NFiniti
WLI-UC-G300N
Cisco / Linksys
Wireless Network USB Adapter
WUSB100
Netgear
Wireless-G 54 USB Adapter
WG111 v3
4.3.4. RS232 Interface on connector X6
The RS232 interface is connected on X6. The transmission parameters can be configured by
means of software protocol.
Figure 8: RS232 interface pin-outs on X6