Maintenance
If you need to change the belts, please contact the distributor or local agent. Do not change them
by yourself.
Residual risks
Even when the machine is used as prescribed it is not possible to eliminate all residual risk factors.
The following hazards may arise in connection with the power tool’s construction and design:
1. Damage to lungs if an effective dust mask is not worn.
2. Damage to hearing if effective hearing protection is not worn.
3. Damages to health resulting from vibration emission if the power tool is being used over longer
period of time or not adequately managed and properly maintained.
WARNING
This machine produces an electromagnetic field during operation. This field may under some
circumstances interfere with active or passive medical implants. To reduce the risk of serious or
fatal injury, we recommend persons with medical implants to consult their physician and the
medical implant manufacturer before operating this machine.
Replace Engine Oil in Crankcase
To avoid engine damage, it is important to:
●
Check oil level before each use and every five operating hours.
●
Change oil after first two operating hours and every 25 operating hours thereafter.
1.
Be sure the gas cap is on and is tighten securely.
2.
Clean area around oil drain plug.
3.
Place approved recyclable oil container under oil drain plug.
Note
: Used oil must be disposed of at a proper collection center.
4.
Take off the oil filler cap and remove the oil drain bolt and washer.
5.
After draining the engine oil, fit on the oil drain bolt and washer and tighten them.
6.
Place the engine in level position, refill recommended oil to the upper level (Oil capacities: 0.5L).
7.
Reinstall the oil dipstick and tighten.
8.
Wipe away any spilled oil.
Maintain Air Cleaner
NOTICE:
In the case of no element or element damaged, the dust will be sucked into the engine
and result in rapid wear of the engine.
1. Remove the air cleaner cover.
2. Remove element.
3. Check the filter element, clean the filter element and replace the filter element if it’s damaged.
4. Clean the air filter base and the air filter cover. Dust should be prevented from entering the intake
port leading to the carburetor.
18
