Operation Manual Universal Gluing Press “LEIMO”
Release 10/2017 - We reserve the right to make technical changes in the interests of further development
9
Gramsham 2 · D-84550 Feichten/Alz
Phone +49- 86 23 - 70 35 · Fax +49-86 23 - 70 36
[email protected]
www.feichtner-maschinenbau.de
Set up / Operation
How to use the holding-down device (clamping device) (accessory):
Use a clamping device for surface gluing so that the workpiece does not bend forward during pressing
and the surface becomes even.
¾
The clamping device is simply to be mounted at the upper and lower longitudinal pipes from above.
(see illustrations on the left)
¾
Now move the clamping device to the desired position.
¾
Then crank the hold-down profile in the direction of the wood panel until the workpiece is evenly
against the press arms.
The clamping device serves only to prevent a deflection of the workpiece,
and not as an additional pressing device.
Place the clamping device on the top
Mount the clamping device
on the lower position
Place the clamping device on the work piece by means
of a crank
