FEI mimsafe 80326, Инструкция по сборке и эксплуатации

Страница: 49 / 55

INFORMATION ABOUT THE WALL KIT
The Wall Kit has been designed and developed specifically to greatly reduce the risk of rotational falls. The most important element
of this kit is that it will not break the fence or risk injury to the horse if hit vertically. The top section is only released when impacted
horizontally by the horse. The risk of a resulting rotational fall is thus reduced.
It is essential to follow the recommended technical specifications of the fence for the correct function. If the recommended procedure
is not correctly followed it may cause the failure of the device.
For your own safety and that of others please note the following step by step advice for correct preparation and installation. Always
ensure that you follow your own health and safety requirements when constructing this fence.
CAUTION: The fence could cause risk of injury in upfolded position if accidentally released.
Ensure that you have all parts of the Wall Kit.
Be aware of the risk of injury when handling heavy rails, posts and the tools for mounting.
Very dry wood material could increase up to 50%
in weight when exposed to very wet conditions.
All the dimensions have been
tested and are in concordance
to the approved tests.
Angled fence tests have
been performed with a
jumping angle between
45 - 67.5 degrees.
45°
67.5°
JU
MP
DIREC
TIO
N
JU
MP
DIREC
TIO
N
FENCE TOP SECTION
FENCE DIMENSIONS
SPRUCE OR PINEWOOD
RECOMMENDED MATERIAL
TOP SECTION
STRAIGHT JUMP
MIN-MAX WEIGHT
lb
55 - 187
kg
25 - 85
MIN-MAX THICKNESS
inch
8 - 10
mm
200 - 250
MAXIMUM LENGTH
inch
177
mm
4500
MIN-MAX HEIGHT
inch
15 - 16.5
mm
380 - 420
Check step 2 Check step 2
TOP SECTION
ANGLED JUMP
MIN-MAX WEIGHT
lb
130 - 200
kg
60 - 90
MIN-MAX THICKNESS
inch
8 - 10
mm
200 - 250
MAXIMUM LENGTH
inch
177
mm
4500
MIN-MAX HEIGHT
inch
15 - 16.5
mm
380 - 420
MIN-MAX A DIMENSIONS
inch 6 – 10
mm 150 - 250
POST
A A