FEI mimsafe 80326, Инструкция по сборке и эксплуатации

Страница: 55 / 55

mimclip.mimsafe.com
Wall Kit - 80324 Edition 2020-12
The advantages of the Wall Kit The advantages of the MIMclip
1. It has been produced with safety being the first and
foremost important factor.
2. Reduces the possibility of rotational falls.
3. FEI approved number FEI13SWE.
4. Controlled movement of fence during release.
5. Reconstruction time is less than 30 seconds.
6. The parts are made of powder coated steel and can be left
outside, no maintenance is required.
7. The very highest quality of product from Sweden ISO 9001.
The MIMclip breaks on impact. The flag is bent
when the clip is exposed to fatigue. In both cases
the clip must be replaced. The top section is
connected to the post with a hinge that makes
the fence easy to reconstruct. This saves time,
guarantees fair and correct judging for riders
and contributes to the overall safety of the
sport.
200 mm
8 inch
50 mm
2 inch
IMPORTANT
When top section is released the gap between top section and bottom section
should be maximum 50 mm.
If gap is wider, then place object to shrink/reduce the gap.
When top section is released the distance between top section and ground
should be minimum 200 mm.
If distance between ground and top section is less, then place an object which
will prevent the top section falling into the SAFE AREA
The flag is bent when fatigued.
WARNING
To procect the fence mechanism when
released, put a dampening material
between the safe area and the released
part of the fence.