FEI mimsafe 80326, Инструкция по сборке и эксплуатации, Страница: 41 / 55

INFORMATION ABOUT THE TABLE KIT
The Table Kit has been designed
and developed specifically to greatly
reduce the risk of rotational falls.
The most important element of this kit
is that it will not break the fence or risk
injury to the horse if hit vertically.
The top is only released when impacted
horizontally by the horse. The risk of a
resulting rotational fall is thus reduced.
It is essential to follow the recommended dimensions on the fence for the correct function. If the
recommended procedure is not correctly followed it may cause the failure of the device.
For your own safety and that of others please note the following step by step advice for correct
preparation and installation. Always ensure that you follow your own health and safety requirements
when constructing this fence.
CAUTION: The fence could cause risk of injury in upfolded position if accidentally released.
Ensure that you have all parts of the Table Kit.
Be aware of the risk of injury when handling heavy rails,
posts and the tools for mounting.
Very dry wood material could increase up to 50%
in weight when exposed to very wet conditions.
Top section should be constructed as a framework. Material thickness 45 mm/ 1,8 inch.
Recommended material: Spruce or Pinewood
APPROVED FENCE TOP SECTION DIMENSIONS
MIN-MAX WIDTH
inch 99 – 173
mm 2500 - 4400
MIN-MAX WEIGHT
lb
440 – 660
kg 200 - 300
MIN-MAX LENGTH
See the sizing charts further on
this document.