FeelElec FY8300 Series, Руководство пользователя

Страница: 42 / 47

FeelElec
40 FY8300 Series User
’
s Manual
Sy
nchronization
Press the [SYNC] button to enter the synchronization function setting
interface. Press corresponding buttons on the right to highlight or cancel selecting
status.
When the synchronization of corresponding parameters are activated, the
corresponding parameters of CH2,CH3 will vary according to variation of CH1
automatically. The parameters workable for synchronization include waveform,
frequency, amplitude, offset, and duty cycle, which can be set separately.
When WAVE is highlighted, the waveform of CH2,CH3 will vary according to
variation of CH1.
When FREQ is highlighted, the frequency of CH2,CH3 will vary according to
variation of CH1.
When AMPL is highlighted, the amplitude of CH2,CH3 will vary according to
variation of CH1.
When OFFS is highlighted, the offset of CH2,CH3 will vary according to
variation of CH1.
When CH is highlighted, the output state of CH2,CH3 will vary according to
variation of CH1.
When DUTY is highlighted, the duty cycle of CH2,CH3 will vary according to
variation of CH1.
When RISE is highlighted, the Rising edge time of CH2,CH3 will vary
according to variation of CH1.
When FALL is highlighted, the Decline edge time of CH2,CH3 will vary
according to variation of CH1.
Key points :
The synchronization function of FY8300 series generators will be
automatically saved after each setup, and the system will still be valid after
restart. When the user can not correctly change the system parameters,
please confirm whether the step function has been opened.