3
Receptacle and Face Plate
Warning Sign
1/2 inch NPT
Atomizing Nozzle
Injector with
Injection Hose
Scent Container
Cover
Metering Pump
6 ft.
2 ft.
Pressure Hose
Suction Hose
with Filter
mr
.
steam
®
AROMAFLO Operation & Installation
__________________________________________________________________
Box Contents
Shipping Hose
CA
UT
ION
Fo
r A
rom
aF
lo 1
20
V
pu
mp
con
ne
ctio
n o
nly
.
Oth
er
con
ne
ctio
ns
ma
y r
esu
lt
in c
ircu
it o
ver
loa
d.
PU
R 1
03
87
6
This room is equipped with an aromatic oil dispensing
system.
Leave the room immediately if you have any adverse
or
allergic reactions, including difficulty breathing or eye,
nasal, throat, or skin irritation and seek medical atten-
tion.
mr.steam
®
Commercial Steam Generators
Sussman-Automatic Corp. 43-20 34th Street , Long Island City NY 11101
1 800 76 STEAM • www.mrsteam.com
WARNING
!
Installation &
Operation Manual
GENERAL INSTALLATION
Do Not alter or modify any Mr. Steam
product. Doing so may result in an inoperable or hazardous
installation and will void the warranty.
The AromaFlo pump is qualified for use
with Mr.Steam commercial steam generators. The use
with other brand equipment must be qualified by instal-
lation owner/ installer. For use with commercial steam
rooms only. Not for use in residential installations.
1. Mr.Steam AromaFlo Pumps are designed and intended
for indoor use only and are to be located indoors in a dry
clean location and not subject to moisture, condensation
or similar high humidity environments.
2. Do not install AromaFlo Pumps outdoors.
3. Do not install AromaFlo Pumps in a location where water
could freeze.
4. Do not install AromaFlo Pumps near flammable or corro-
sive materials and chemicals. Installation in areas having
high concentrations of chlorine (such as pool equipment
room) should be avoided.
5. Install AromaFlo Pump on a solid and level surface.
6. Provide access to AromaFlo Pump for servicing.
7. The unit should not be installed in areas accessible to the
general public (ie: utility room). A LOCKED UTILITY
ROOM IS STRONGLY RECOMMENDED.
8. Height difference between metering pump and 90
degree T is to be held to a maximum 6 ft.(see page 5).
9. Place scent container below metering pump. Height dif-
ference between metering pump and scent container is
to be no greater than a maximum of 3 feet(see page 5).
Clearance to heat sources
•
Do not install the metering pump directly below or above
the steam generator where it is subject to heat.
•
Distance between metering pump and heat source (e.g.
Steam Line
90˚ T
Figure 2
steam generator, heating system) minimum 3 ft. If this
distance of minimum 3 ft cannot be maintained, install a
radiation plate or heat insulation between the heat
source and metering pump.
•
Ambient temperature at pump should not exceed 90˚ F.
Installing the 90 degree T & Atomizing Nozzle
1. For optimal results locate the 90 degree T (not provid-
ed) and atomizing nozzle in the steam supply line no
more than 10 feet from the steam head (see page 5).
2. T must face downward as shown on (see page 5).
3. Screw the atomizing nozzle into 90° T fitting.(see pg. 5).
IMPORTANT NOTE: Follow the installation instructions
for the steam pipeline in the Mr.Steam Commercial
Steam Bath Installation and Operating Manual (PUR
101376).
CAUTION
!
WARNING
!
