9
TERMINAL IDENTITY...
To set the identity of the terminal, select the ‘
COMMS
IDENTITY
’ option from the main scrolling menu by pressing
SW1
when it is dis-
played.
By pressing
SW1
when the up or down arrows are displayed, scroll to the identity number
you require. When the required number has been selected, press
SW1
when the tick is
displayed to confirm.
The display will revert back to the main menu.
COMMS INTERFACE...
To set the type of communications, select the ‘
COMMS
INTERFACE
’ option from the main scrolling menu by pressing
SW1
when it is dis-
played.
By pressing
SW1
when the up arrow is displayed, scroll to the communication type re-
quired. There are 4 options:
1.
RS232+RS485 *
2.
MODEM
(reserved)
3.
RS232
4.
RS485
When the required type has been selected, press
SW1
when the tick is displayed to con-
firm.
*
Option 1 is provided to enable the set
-
up procedure without knowing the interface type.
It is strongly recommended that option 3 or 4 is selected for normal use to avoid unneces-
sary interference on the cable.
NOTE
: RS232 comms must be selected when the Ethernet board is fitted.
COMMS IDENTITY
COMMS IDENTITY
1
COMMS INTERFACE
COMMS INTERFACE
RS232+RS485
COMMISSIONING THE TERMINAL
