E3980 VRSS
25
12.2
WEEKLY CLEANING
This procedure is recommended on a weekly basis. It may need to be performed more
often if necessary to maintain a clean, sanitary case. The case should be cleaned to this
procedure before using the first time.
NOTICE:
Avoid splashing or soaking any electrical components with
water to prevent electrical damage to the case.
NOTICE:
Shut off lights, disconnect power and remove all products from
case. Allow sufficient time for the unit to reach room
temperature before proceeding with cleaning.
NOTICE:
Remove all products from the case before proceeding with
cleaning procedure.
NOTICE:
This case is not designed to be cleaned by flushing.
1. Side, and rear door glass can be cleaned with common window cleaners.
2. Remove interior shelving and display deck from unit as described in the
“Shelving Installation and Removal” section of this manual.
3. Clean all shelves, shelf supports, shelf light deflectors, shelf brackets, shelf
standards using warm soapy water and a brush. Rinse thoroughly and allow to
dry.
4. Remove the display deck and clean using warm soapy water and a brush. Rinse
thoroughly and allow to dry.
5. Clean the entire interior of the case using warm soapy water. Wipe off all soapy
water with a damp cloth and allow to dry. (DO NOT use solvents such as
Acetone, Benzene, Carbon Tetrachloride, and Lacquer Thinners)
6. Reassemble all components in reverse order.
7. The exterior surfaces should be wiped down using any ammoniated cleansers or
warm soapy water.
