- 15 -
SECURITY NIGHT COVER (OPTION)
SECURITY NIGHT COVER
LOCK HANDLE
(SHOWN IN LOCK POSITION)
LOCK HANDLE
(SHOWN IN LOCK POSITION)
GRAB HANDLE
GRAB HANDLE
TOP GLASS HANDLE
FRONT CLEAR DEFLECTOR
"U" RATAINER CLIP
"U" RATAINER CLIP
"U" RATAINER CLIP ON CENTER
(ON SOME MODELS)
LOCK HANDLE CATCH
LOCK HANDLE CATCH
REMOVAL:
1.
Unlock the lock handles and turn the handles to the vertical position to disengage from lock
handle catches.
2.
Grab the front grab handles and lift the cover straight up and out of the case opening.
INSTALATION:
1.
Turn the lock handle so the latch handle is vertical to the top of the case.
2.
Holding the grab handles place the bottom flange of the security night cover inside the “U”
retainer clips located on each side of case opening behind the front clear deflector. There
also may be a “U” retainer clip in the center of the case that must also engage the security
night cover flange.
3.
Set the top flange of the security cover down against the top glass handle.
4.
Turn the lock handles so they engage the lock handle catches and use the key to lock them
in place.
IMPORTANT:
Cleaning the Acrylic plastic security night cover requires special care to prevent hazing of
the material. Lightly dust (not wipe) the surface with clean soft cloth. Then the surface can be wiped
carefully with a soft, wet cloth or chamois. The cloth or chamois must be kept free of grit by frequently
rinsing in clean water. Grease and oil can be removed with kerosene. Do not use window cleaners or
kitchen scouring compounds. DO NOT use solvents such as Acetone, Benzene, Carbon Tetrachloride, and
Lacquer Thinners. A spray wax such as Pledge or Maguire’s polish can be applied and wiped with a clean
soft cloth. The wax tends to fill in and hide small scratches.
