Although it is extremely versatile,
the SmartSystem-LMS is opera-
tional right out of the box. It comes
preconfigured according to the chart
to the right. All operation instruc-
tions on this page will be in refer-
ence to the default configuration.
Many of these functions, as well as
some not listed, can be changed to
meet the user’s specific needs. Make
sure to take the time to read through
this manual to understand the full
versatility of this product.
All warnings and cautions that ap-
pear in the SS2000LMS hardware
installation and maintenance
manual also apply to information
given in this manual. Make sure you
are aware of these warnings and
cautions before you begin using this
manual and reconfiguring the
SS2000LMS system.
DEFAULT CONFIGURATION
PRTY - Priority tone will activate
only when the siren is enabled.
MAN - Will produce peak & hold
tone when no other sirens are active.
If wail or yelp are active, the tone
will change to priority for 8-seconds
then revert back to the previous
tone. Horn Ring will do the same if
it is transferred to the siren.
A/H - Will produce Air Horn tone any
time it is pressed.
LRC O - SignalMaster Arrow Step
through (Left, Right, Center Out,
Off).
WARN - SignalMaster Warn Step
through (Warn 1, 2, 3, 4 & Off).
FAST - SignalMaster Arrows and
Warn - fast speed override.
LO PWR - SignalMaster Arrows -
Low Power Pattern override.
COMMON MIC. Control - enabled.
HI IDLE Control - disabled.
Load Manager Voltage
Threshold - 11.0V, 11.8V, and 12.8V
Low Voltage Alarm - Enabled.
Load Shedding Sequence -
Relay E, D, C, B, A, 1, and 2.
Slide Switch Position 1 - Activates
relay 1 and Warn-1 SignalMaster.
Slide Switch Position 2 - Activates
relay 1 & 2, Warn 2 SignalMaster,
and the Horn Ring Transfer Relay.
Slide Switch Position 3 - Activates
relay 1, 2, & 3, Warn 3 SignalMaster,
the Horn Ring Transfer Relay, and
enables the Siren.
Auxiliary relay keys A-E activate
the corresponding relays and are all
Push On/Push Off type functions.
STBY - Turns off sirens.
RAD- Turns on Radio Rebroadcast.
WAIL - Wail tone will activate only
when the siren is enabled. In the
default configuration, only mode 3
enables the siren.
YELP - Yelp tone will activate only
when the siren is enabled.
OPERATION
SmartSystem-LMS
9
10
11
12
13
14
15
16
4
5
6
7
8
20
19
17
18
OFF
1
2
3
LRC O
WARN
STBY
PA/
HI IDL
RAD
WAIL
YELP
PRTY
C
B
A
D
E
MAN
A/H
FAST
LOPWR
290A3875B
-1-
Содержание SmartSystem SS2000-LMS
Страница 6: ...4...
Страница 24: ...Printed in U S A 255333E REV E 903...
