Federal Signal Corporation PS600 SelecTone, Инструкция по установке и обслуживанию

Страница: 9 / 24

9
Installation and Maintenance Instructions
Selectone Model PS600
During Power Failure
Voltage: 26.4 Vdc no load
24 Vdc nominal
Current: 6 A maximum
(25° C)
*(see note)
Output Circuits
(Non-Power-Limited) 6 A at 24 Vdc resistive
Dry Contact Closure
of Trouble Out Relay Connect to power limited circuits
ac Fail Relay 2 A, 120 Vac/28 Vdc
Battery Trouble Relay 2 A, 120 Vac/28 Vdc
Battery Package
Number of Batteries 2 connected in series
Battery Voltage 12 V each (24 V total)
Capacity 12 Ah
Type Sealed, lead-acid gelled electrolyte
Recharge Time 48 hours (after complete discharge)
Charging Current 1.25 A maximum
Physical
Dimensions (HWD) 15.50 in x 12.50 in x 4.50 in
Weight 13 lb (without batteries)
Operating Temp. Range 0° C to + 49° C
*Battery current capacity changes throughout the operating temperature range.
Unpacking the PS600
After unpacking the PS600, examine it for damage that may
have occurred in transit. If the unit has been damaged, do not
attempt to install or operate it. File a claim immediately with
the carrier, stating the extent of the damage. Carefully check all
envelopes, shipping labels, and tags before removing or discarding
them. Disposal of all shipping materials must be carried out in
accordance with national and local codes and standards. If any
parts are missing, please call Federal Signal Customer Support at
708-534-4756 or 877-289-3246.