Federal Signal Corporation PS600 SelecTone Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 24

Federal Signal Corporation PS600 SelecTone Скачать руководство пользователя страница 5

5

Installation and Maintenance Instructions

Selectone Model PS600

Safety Messages to Installers

It is important to follow all instructions shipped with this product.

This device is to be installed by a trained electrician who is

thoroughly familiar with the National Electrical Code and/or

Canadian Electrical Code and will follow the NEC and/or CEC

Guidelines as well as all local codes.

The selection of the mounting location for the PS600, its controls

and the routing of the wiring are to be accomplished under the

direction of the facilities engineer and the safety engineer. In

addition, listed below are some other important safety instructions

and precautions you should follow:

• Read and understand all instructions before installing or

operating this equipment.

• The nameplate should NOT be obscured, as it contains

cautionary and/or other information of importance to

maintenance personnel. Ensure the nameplate remains readable

if the housing exterior is painted.

• Do not connect this unit to the system when power is on.

• After installation, ensure that all bolts and threaded joints are

tightened.

• Establish a procedure to routinely check the power supply for

proper activation and operation.

• Provide a copy of these instructions to the Safety Engineer,

operator(s) and maintenance personnel.

• File these instructions in a safe place and refer to them when

maintaining and/or reinstalling the device.

Failure to follow all safety precautions and instructions may result

in property damage, serious injury, or death.

«
...
3
4
5
6
7
...
»

Содержание PS600 SelecTone

























Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды